
Fortrac® geogrids are manufactured from high-modulus, low-creep synthetic yarns and have a
protective polymer coating. Fortrac® can be supplied in various mesh sizes and standard strengths between
20 kN/m and 150 kN/m. For special applications we can supply strengths over
1,000 kN/m. Fortrac® geogrids are normally supplied in widths of 3.70 and 5.00 m
and roll lengths of 100-300 m so that overlapping can be reduced to a minimum. Special sizes
can also be supplied at short notice.
Fortrac® exhibits considerably lower deformation under permanent loading than many grids
of equivalent nominal strength from other manufacturers. Fortrac® geogrids are also manufactured from the
new generation of polymers (aramid, polyvinyl alcohol) and open new perspectives for project-specific reinforcement.
The versatility of Fortrac® products results from the experience gained in all the projects carried out to date.
Planned, designed and implemented as a result of close cooperation between our engineers and research centres,
engineering design offices, construction companies, project promoters and operators, Fortrac® has proved
time after time to be the best.
|
Typical applications:
- load-bearing layers in road, railway and airport construction
- access roads and transportation routes
- retaining walls and extra-steep earthwork slopes
- slope stabilisation
- noise reduction barriers
- reclamation of industrial wasteland
- earth embankments over piles
- landfill
- bridging of underground voids or sinkholes
|

|
Properties:
- high tensile force at low elongation
- high ultimate tensile strength
- excellent long-term behaviour due to low creep characteristics
- high resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage
- good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material
- problem-free installation due to low product weight and excellent flexibility even in extreme cold
- very wide range of tensile strengths in length and width
|
Information about areas of application:

Reports:

 |
|

|
233 KB |
 |
|

|
212 KB |
 |
|

|
203 KB |
 |
|

|
879 KB |
 |
|

|
518 KB |
 |
|

|
573 KB |
 |
|

|
172 KB |
 |
|

|
164 KB |
 |
|

|
295 KB |
 |
|

|
299 KB |
 |
|

|
333 KB |
 |
|

|
361 KB |
 |
|

|
373 KB |
 |
|

|
364 KB |
 |
|

|
363 KB |
 |
|

|
1163 KB |
Press Release:

Press Review:

 |
|

|
876 KB |
 |
|

|
611 KB |
 |
|

|
422 KB |
 |
|

|
358 KB |
 |
|

|
575 KB |
 |
|

|
786 KB |

Fortrac® is a registered trademark of HUESKER Synthetic GmbH

|