Grain

Under our climatic conditions, grain crops in a harvestable condition are seldom fit for immediate storage. If the moisture content of the grain is higher than 16 %, then steps have to be taken to avoid the crop decaying during storage.

Air drying, even with cold air, plays a very important role in current farming practice. Using this process, air is often blown through perforated plates (slotted plate), steel plate ducts with air outlet openings or under-floor ducts covered with slotted concrete slabs. To avoid grain getting into these ducts means that the ducts have to be covered with a drying woven.

Oil-seed rape and seed crops

It is well known that crops like oil-seed rape always have to be dried after harvesting. To be storable the moisture content has to be below about 9 %. The same drying nonwoven is also suitable for grass seed.

There are three types of drying wovens available.

Please contact us for further details or request our product information.

HaTe® crop covers are designed to suit specific user requirements. We recommend that our HaTeplan® wovens are used for crops that require to be stored in watertight conditions. For other applications, other conditions e.g. through-air ventilation and special highly water resistant covers may be the solution.

For agriculture we manufacture special HaTe® crop cover nonwovens. One of these is HaTe® beet cover nonwoven for covering beet stores.

Please contact us for further details or request our product information.

A really efficient transportation system is indispensable for the manpower-intensive mushroom cultivation industry. For this area of application we manufacture textile systems for each practical requirement e.g. culture, sliding and tensile mat textiles.

Please contact us for further details or request our product information.

Insect protection textiles manufactured from PE monofilament are available in various widths and are intended for use as protection against flies, midges, mosquitoes and other harmful insects. The material is UV stable and weather resistant.

The mesh size is suitable for the requirements of the commercial gardener as well as for house and home. The material is dimensionally stable and can be stretched over windows and doors.

Please contact us for further details or request our product information.

We design and manufacture high node strength HaTe® aquaculture mesh for fish farming in all required mesh sizes. To cater for all the requirements of aquaculture, we manufacture HaTe® covers in polygonal or round shapes in all sizes.

Please contact us for further details or request our product information.